Bird Cell Phone v750 mic Ways Jumper
Anonymous
How To Find Rx Tx Signels
Anonymous
Find Rx .tx Signles easyyy
HOW TO FIND RX .TX SIGNLES .
It is tasted and also you can test it.
1 step is* we need to find GND from phone.
2 step is* we should power on phone (operation with dead phone:
phone must be 100% dead by software)and take multimater put it to voltage.
3 multimeter (-) line put it GND and with (+) line check each connectors
* and usually Tx= 1.8v or 2.8v and Rx=1.7v or 2.7v
(it will be change by processor but strongly 1.7v or 2.8v not 3v or 4v)
This way is too easy and you will save a more time.
For example!
You have got new brand China miracle phone with USB cable. It has got
12 pin. You must find (Infinity team give good Idea 1.2.3 punkts):
1) GND usually it has got 2 GND. (now we have got 10 pins)
2) We will uncheck USB + and USB- (VSS) just with checking by USB cable (now we have 8 pins)
3) By USB cable we also uncheck V bat+* ac adaptor + polarization (now we have 7 pins)
4) Now from this 7 pins you will find 1 or 3 not used pins (last operation we have 3 or 6 pins to find Rx Tx signals)
5) Now at last operation you should use good multimeter just to find Rx Tx with 1.7v-2.7v or 1.8v-2.8v
6) WHEN PHONE IS POWERD OFF TX AND GND WITH MULTIMETER MAKING BEEEEEP
(DIOD TEST OPERATION)* WHEN PHONE POWERED ON IT WILL SHOW LIKE DIOD
RESISTANS 600-700 OHM BETWIN TX AND GND.
I think I have give for every body more information’s. Just try to
find. If you find 2-3 phone signals and you will be profi mobile Tx and
HOW TO FIND RX .TX SIGNLES .
It is tasted and also you can test it.
1 step is* we need to find GND from phone.
2 step is* we should power on phone (operation with dead phone:
phone must be 100% dead by software)and take multimater put it to voltage.
3 multimeter (-) line put it GND and with (+) line check each connectors
* and usually Tx= 1.8v or 2.8v and Rx=1.7v or 2.7v
(it will be change by processor but strongly 1.7v or 2.8v not 3v or 4v)
This way is too easy and you will save a more time.
For example!
You have got new brand China miracle phone with USB cable. It has got
12 pin. You must find (Infinity team give good Idea 1.2.3 punkts):
1) GND usually it has got 2 GND. (now we have got 10 pins)
2) We will uncheck USB + and USB- (VSS) just with checking by USB cable (now we have 8 pins)
3) By USB cable we also uncheck V bat+* ac adaptor + polarization (now we have 7 pins)
4) Now from this 7 pins you will find 1 or 3 not used pins (last operation we have 3 or 6 pins to find Rx Tx signals)
5) Now at last operation you should use good multimeter just to find Rx Tx with 1.7v-2.7v or 1.8v-2.8v
6) WHEN PHONE IS POWERD OFF TX AND GND WITH MULTIMETER MAKING BEEEEEP
(DIOD TEST OPERATION)* WHEN PHONE POWERED ON IT WILL SHOW LIKE DIOD
RESISTANS 600-700 OHM BETWIN TX AND GND.
I think I have give for every body more information’s. Just try to
find. If you find 2-3 phone signals and you will be profi mobile Tx and
BlackBerry 8520 Hange On Logo Repair
Anonymous
China Phone Symphony S90 White Display
Anonymous
H100 Alfatel Charging Problem
Anonymous
G-TIDE G19 China Phone Charging
Anonymous
Sim Jacket Ways From Power IC Mtk6305
Anonymous
Blackberry 9630 Fake Charging ways
Anonymous
Samsung i9300 Not Charging Jumper
Anonymous
How To Move Playlist Of iPhone To Your Computer ways
Anonymous
Some people have large list of music in their iphones and they want to keep their iphone playlist secure.If You want to play these simple playlist on your computer follow these simple steps.
Step 1: In order to create a playlist on your iPhone or any other iOS device, launch the Music app and then tap on Playlists located at bottom left corner of your screen.
Step 2: Once Playlist screen opens up, tap on Add Playlist.
Step 3: Now you will be prompted to add a name for your playlist. Type it on and tap on Save.
Step 4: Once you have saved your new playlist, you will see a screen where you can choose which songs you want to add to your newly created playlist. To add a song tap on the blue-colored plus sign located to the right side of song title.
Step 5: When you have add all songs, tap on the Done button, located in top right corner.
Step 6: To transfer your newly created playlist or a playlist you created before, connect your iPhone with your Mac or Windows PC using a cable or Wi-Fi.
Step 7: Launch the iTunes app on your Mac or Windows PC and from left pane, under Devices click on your iPhone or other iOS device.
Step 8: Now from tabs located at the top of your iTunes window, select the checkbox in front of Sync Music and then select Selected playlists, artists, albums, and genres.
Step 9: Then select playlists you want to move from your iPhone to your Mac or Windows PC.
Step 10: To start synchronization process click Apply button.
Step 11: The synchronization process will start, and once finished you will see the playlists inside iTunes left pane.
Samsung C3312 Light Problem
Anonymous
You might also like:
Anonymous
Samsung E2252 Flash Files Download ways
Anonymous
Subscribe to:
Posts (Atom)